Command forklift - description and operation of electronic w
Time: 2019-09-28 16:23:14views: 185source: 未知Return
Introduction to electronic weighing truck
○Manual forklift is used to insert the cargo fork it carries into the tray hole. The hydraulic system is driven by manpower to realize the lifting and lowering of the pallet cargo, and the handling operation is pulled by manpower.
○It is the most simple, most effective, most common loading and unloading tools in pallet transportation.
○The manual hydraulic truck adopts baosteel 4mm steel plate with no break point and reliable welding strength;
○The drop speed of the oil cylinder is not affected by the load.
○Adopt import sealing ring, piston rod chrome plating;
○Internal overflow valve provides overload protection, effectively reducing maintenance costs;
○High quality radial roller bearing is adopted at the connection of rotating shaft, which is flexible and non-jitter.
○The integrated casting wheel frame is equipped with front and rear guide wheels to protect the fitting wheel from impact and extend the life of the wheel.
○Adopt conical arc fork design, fast and convenient to enter and exit the tray;
○The moving part is equipped with wear-resistant guide ring, which can absorb partial load and prolong the service life.
○Its handle fork is equipped with rubber pad, greatly extending the service life.
Electronic scale truck operation method steps
●1.The electronic scale of the truck should be preheated when used, and the movable arm should be lifted 5-10 times to preheat the oil pressure and sensor to the normal working temperature
●2.During operation, when the bucket is lifted, the control lever of the moving arm should be placed at the pole position, that is, the bucket is at the last end
●3.The moving arm system shall be strictly lubricated to reduce the friction coefficient of the moving arm
●4.Choose a flatter surface for weighing
●5.The process of lifting the moving arm should control the speed evenly
●6.It is better to set zero when the vehicle stops running
●7.Avoid vehicle driving during weighing. If necessary, the vehicle speed should be controlled at 10KM/h
●8.If multiple dumpers are provided, the dumpers used must be calibrated at weighing
●9.Electronic scale before starting up the car, the electronic scale off and then turn off the car power
